One of the single most conditions that effects modern vehicles
In today’s world of modern engines, especially those featuring direct fuel injection (DFI) like BMW, Audi, Volkswagen TSI, FSI, TFSI, GTI, and most diesel engines. One common issue plaguing high-performance vehicles is carbon buildup. This buildup, which forms in the intake ports, is a result of the direct injection technology. Fuel is injected directly into the combustion chamber, bypassing the intake valves. While this improves fuel efficiency and power, it unfortunately allows carbon to accumulate on the intake valves. Over time, this leads to reduced engine performance, increased fuel consumption, rough idling, and in some cases, complete engine misfires.
Sluggish Performance
If you’ve noticed your engine feeling sluggish, experiencing power loss, or simply not running as smoothly as it once did, it’s likely time to consider an Intake Port Cleaning Service using the Walnut Shell Blasting method effectively removing carbon buildup from the intake port system. Here’s why this service is a game-changer for modern engines.
Why Carbon Buildup is a Problem for Direct Injection Engines
Direct injection engines, like those in BMW, Audi, Volkswagen TSI, FSI, TFSI, and GTI models, offer tremendous benefits, including better fuel efficiency and increased performance. However, the very design that makes them so efficient also contributes to carbon buildup. In a traditional port injection system, fuel is sprayed directly over the intake valves, which helps wash away any carbon deposits. However, in direct injection engines, the fuel is injected directly into the combustion chamber, bypassing the intake valves entirely. This means carbon buildup on the intake valves and ports is inevitable.
Place A Cloth Over Your Mouth & Try To Breath
When carbon builds up in the intake manifold, it restricts airflow to the engine, causing a drop in power, fuel economy, and overall engine performance. In severe cases, carbon buildup can even cause misfires or engine stalling. This problem becomes particularly pronounced in turbocharged engines like those found in the TSI and TFSI models, where higher pressure and heat accelerate carbonization.
What is Intake Port Carbon Removal?
More than intake cleaning
We specialise in European cars
Audi A5 Carbon Buildup Intake Cleaning
Are you experiencing issues with the performance or reliability of your car? Book in for our diagnostic service where we can determine e
xactly whats wrong with your vehicle. We offer more services that just intake cleaning, injector cleaning & service, EGR valve cleaning, oil catch can installation. We offer a broad selection of specialised services for European cars like BMW, Mercedes and Audi. If you have had issues elsewhere, come and see us, we specialise in diagnosing problematic issues. Contact us today.
- Safe and Effective: Unlike other methods that might involve harsh chemicals or even disassembling parts of the engine, walnut shell blasting is safe for your engine. The soft nature of the walnut shells ensures no damage to delicate parts, and the process avoids the need for cylinder head removal.
- No Need to Remove the Cylinder Head: In the past, removing carbon buildup often meant disassembling the engine and pulling off the cylinder head. This was not only costly and time-consuming, but it also meant your car would be out of commission for days. Walnut shell blasting cleans the intake manifold and valves without the need for such a drastic and expensive procedure.
- Restores Performance: By clearing away carbon buildup, walnut shell blasting restores airflow to the intake ports, improving fuel economy, throttle response, and overall engine performance. It also reduces rough idling and misfires caused by clogged intake valves.
- Eco-Friendly and Non-Toxic: Walnut shells are a natural material, making them an environmentally-friendly choice compared to other abrasive media. The process is also non-toxic and safe for both your engine and the environment.
Intake Port Carbon Removal with Walnut Shell Blasting
A revolutionary, non-invasive method for cleaning the intake ports of modern direct injection engines. This process uses crushed walnut shells as a medium, blasting into the intake manifold and intake ports using pressurised air. The walnut shells are abrasive enough to safely remove stubborn carbon deposits without damaging sensitive engine components.
The Walnut Shell Blasting Process
- Inspection and Preparation: Our experts begin by thoroughly inspecting your engine’s intake manifold to determine the extent of the carbon buildup and assess any other potential issues.
- Engine Preparation: The intake manifold is sealed off to prevent walnut shells from entering unwanted areas of the engine. We carefully ensure that only the intake ports are targeted for cleaning.
- Blasting: Walnut shells are introduced into the intake manifold using specialised equipment. The shells are carefully blasted against the carbon buildup, breaking it down and clearing the intake ports without damaging any sensitive engine components.
- Post-Cleaning Inspection: Once the process is complete, the engine is inspected again to ensure that all carbon buildup has been removed, and the intake ports are fully restored. Any remaining debris is vacuumed out, and the engine is reassembled for testing.
- Test Drive: We take the vehicle for a test drive to ensure that it’s running smoothly, checking for improvements in throttle response, power, and idle quality.
Why Choose Walnut Shell Blasting?
While there are other methods of cleaning intake manifolds, such as chemical treatments or using a borescope and scraping, walnut shell blasting is the only truly effective method that doesn’t require you to remove the cylinder head. It is fast, efficient, and most importantly, it won’t compromise your engine. Walnut shell blasting has been proven to restore engine performance, reduce fuel consumption, and extend the lifespan of your vehicle’s engine.
A Clean Engine Equals Better Performance
If you own a modern direct injection vehicle like a BMW, Audi, Volkswagen, or any other turbocharged engine, and you’re experiencing a loss of power, rough idling, or poor fuel economy, walnut shell blasting may be the solution. Restore your engine’s efficiency and power with a thorough intake manifold cleaning service using walnut shell blasting, and drive with confidence knowing your engine is in peak condition.
Schedule Your Intake Port Carbon Removal Today!
Don’t let carbon buildup rob your engine of its performance. Contact us today to schedule your intake port carbon clean service. Our skilled technicians are ready to help restore your engine’s performance and get you back on the road with improved power and efficiency. Keep your engine running smoothly and prolong its lifespan with the only effective intake manifold cleaning service available!
